Quality
- Home
- Quality
CERTIFICATIONS
Limited to processes requiring customer approval.CUSTOMER SPECIAL PROCESS APPROVALS
Process | Process Code | Specification | Description | Comment |
---|---|---|---|---|
Chemical Processing | 320 | MIL-C-5541 | Chemical Conversion Coating on Aluminum | N/A |
Chemical Processing | 320B | MIL-DTL-5541 | Chemical Conversion Coating on Aluminum | N/A |
Chemical Processing | 321 | BAC 5719 | Chemical Conversion Coatings for Aluminum | N/A |
Heat Treat | 111 | BAC 5602 | Heat Treat of Aluminum Alloys | N/A |
Hardness Testing | 806A | BAC 5650 | Hardness Testing | N/A |
Temper Inspection | 806 | BAC 5946 | Temper Inspection of Non-ferrous Alloys | (including BAC 5651) |
Testing | 809 | N/A | Process Solution Control | N/A |
Testing | 802 | N/A | Mechanical Testing, | N/A |
QMS | 002 | AS9100D | Quality Management System, Direct Contract | N/A |
Process | Specification | Description | Comment |
---|---|---|---|
Accelerated Curing | BAPS 138-055 | Accelerated Curing of Organic Coatings | Limited to Oven #2 and #3 |
Assembly Operations | BAPS 157-027 | Fuel Tank Sealing | Limited to Fay surface sealing, fillet sealing, injection sealing, pack sealing, gap sealing, wet installation of fasteners and aerodynamic sealing |
Assembly Operations | BAPS 157-028 | Pressure and Environmental Sealing | Fay surface sealing, fillet sealing, injection sealing, pack sealing, gap sealing, wet installation of fasteners and aerodynamic sealing |
Assembly Operations | BAPS 150-003 | Installation of Safety Devices | Limited to Cotter Pin installation |
Assembly Operations | BAPS 151-001 | Installation of Conventional Rivets | Limited to installation of conventional rivets |
Chemical Processing | BAPS 160-010 | Chromic Acid Anodizing | N/A |
Chemical Processing | BAPS 160-020 | Chemical Conversion Treatment for Aluminum Alloys | Limited to Type 1 and Type 2 with Alodine 1132 "Touch & Prep Pen " for repaired area |
Chemical Processing | BAPS 180-001 | Alkaline Cleaning | N/A |
Chemical Processing | BAPS 180-032 | Acid Cleaning & Deoxidizing of Aluminum Metals | N/A |
Heat Treat | BAPS 168-007 | Heat Treatment of Aluminum Alloys | N/A |
Heat Treat Verification | BAPS 168-013 | Hardness and Electrical Conductivity Testing of Metals | N/A |
Identification | BAPS 144-005 | Identification of Aircraft Parts | Limited to Dot Peen |
Laboratory | BAERD GEN-018-1B | Wet Chemistry, Titration | N/A |
Laboratory | BAERD GEN-018-2A | Static Testing, Metals | N/A |
Laboratory | BAERD GEN-018-5E | Engineering Requirements for Laboratories | Captive laboratory limited to paint adhesion test per BATS 4860 |
Prime & Topcoat | BAPS 138-043 | Application of Fluid Resistant Primer | Limited to 44G N 60 primer system |
Prime & Topcoat | BAPS 138-044 | Application of Fluid Resistant (Fr) Enamels and Decorative | N/A |
Prime & Topcoat | BAPS 157-026 | Spray Application of BAMS 565-010 Fuel Tank Coating | Limited to Touch-up Only |
Prime & Topcoat | BAPS 157-027 | Fuel Tank Sealing | Limited to Fay surface sealing, fillet sealing, injection sealing, pack sealing, gap sealing, wet installation of fasteners and aerodynamic sealing |
Process | Specification | Description | Comment |
---|---|---|---|
Chemical Processing | FES 108-F4/F5 (MIL-DTL-5541) |
Finish Specification/Alodine | N/A |
Chemical Processing | FES 108-F3 (MIL-A-8625) |
Finish specification/ Chromic Acid Anodize | Limited to Type I, Class I (Non-dyed) |
Chemical Processing | FES 116 | Chemical Cleaning of Metals | N/A |
Chemical Processing | FES 116 | Passivation of Stainless Steels | N/A |
Fabrication | FES 119 | Metal fabrication | N/A |
Fabrication | FES 176 | Processing of Composites | N/A |
Heat Treat Verification | FES 159 | Hardness and Conductivity Testing | N/A |
Heat Treatments | FES 103 | Heat Treat of Aluminum Alloys | N/A |
Prime & Topcoat | FES 109 | Application of Corrosion Preventive Compound | N/A |
Process | Specification | Description | Comment |
---|---|---|---|
Chemical Processing | MIL-A-8625/MIL-PRF-8625 | Sulfuric Acid-Anodize | N/A |
Chemical Processing | MIL-A-8625/MIL-PRF-8625 | Chromic Acid Anodize | N/A |
Chemical Processing | AMS-C-5541/MIL-DTL-5541 | Chem Film | N/A |
Heat Treat Verification | 5PTPCG09 | Hardness and Conductivity Testing | N/A |
Heat Treat Verification | AMS 2658 | Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts | N/A |
Heat Treat Verification | ARP-1962 | Training and Approval of Heat Treating Personnel | N/A |
Heat Treat Verification | MIL-STD-152 | Quality Assurance Requirements for Thermal Processing | N/A |
Heat Treatments | AMS 2750 | Pyrometry | N/A |
Heat Treatments | AMS 2772 | Heat Treatment of Aluminum Alloy Raw Materials | N/A |
Heat Treatments | AMS-2770 | Heat Treat of Aluminum Alloys | N/A |
Prime & Topcoat | MIL–C–22750 MIL-C-46168 MIL-C-53039 MIL–C–46168 MIL–C–53039 MIL–F–18264 MIL–P–23377 MIL–P–53022 MIL–P–53030 MIL–P–85582 MIL-DTL-53072 MIL–PRF–22750 MIL–PRF–23377 MIL–PRF–85285 MIL–PRF–85582 |
Prime / Topcoat | N/A |
Process | Process Code | Description | GAMPS | Industry Specification | Comment |
---|---|---|---|---|---|
Chemical Processing | Group: GAMPS 4107 | GAMPS 4107 | Cleaning and Descaling of Titanium & Titanium Alloys | All applicable per GAF 14A | Method I Only |
Chemical Processing | 88 | GAMPS 6201 | Anodic Coating, Chromic Acid, of Aluminum & Its Alloys | MIL-A-8625, TY 1 or 1B, CL 1 | N/A |
Chemical Processing | PS | GAMPS 4103 | Passivation of Corrosion & Heat Resisting Alloys | AMS 2700 | N/A |
Chemical Processing | WD | GAMPS 4105 | Alkaline Cleaning of Ferrous & Non-Ferrous Alloys (Not Titanium & Its Alloys) | MIL-DTL-5002 | N/A |
Chemical Processing | ZZ | GAMPS 4103 | Acid Cleaning of Ferrous Alloys | MIL-DTL-5002 | N/A |
Chemical Processing | 213 | GAMPS 6113 | Chemical Film, Chromate Conversion Coating, Low Electrical Resistance | MIL-DTL-5541, CL 3 | N/A |
Heat Treat | Group: GAMPS 5102 | GAMPS 5102 | Heat Treatment of Wrought Precipitation Hardenable | All applicable per GAF14A | N/A |
Heat Treat | Group: GAMPS 5108 | GAMPS 5108 | Heat Treating of Aluminum Alloys | All applicable per GAF14A | N/A |
Identification | Group: GAMPS 1105 | GAMPS 1105 | Identification Marking of Fabricated Metallic Parts and Asse. | All applicable per GAF14A | N/A |
Machining, Conventional | MCA | GAMPS 2109 | Standard Machining Practice for & Control of Machined Parts in GAC Aircraft | N/A | N/A |
Machining, Conventional | AV | GAMPS 2101 | Fabrication of Aluminum Alloys | N/A | N/A |
Machining, Conventional | AK | GAMPS 2212 | Installation of Helical Coil Inserts, Threaded Screw | N/A | N/A |
Prime & Topcoat | 3012 | GAMPS 3116 & GMS 5005 | Primer | N/A | N/A |
Prime & Topcoat | Group: GAMPS 3203 | GAMPS 3203 | Lacquer: Acrylic, MIL-L-81352A, Application of | All applicable per GAF14A | N/A |
Prime & Topcoat | Group: GAMPS 3209 | GAMPS 3209 | Polyurethane Enamel, Preparation and Application of | All applicable per GAF14A | N/A |
Prime & Topcoat | Group: GAMPS 3219 | GAMPS 3219 | Touch Up of Fasteners to Match Surrounding Structure | All applicable per GAF14A | N/A |
Prime & Topcoat | Group: GAMPS 3303 | GAMPS 3303 | Abrasion Resistant (Anti Chafe) | All applicable per GAF14A | N/A |
Prime & Topcoat | Group: GAMPS 6213 | GAMPS 6213 | Epoxy Topcoat, High-Solids, Phosphate Ester Fluid Resistance | All applicable per GAF14A | N/A |
Process | Process Code | Specification | Description | Comment |
---|---|---|---|---|
Chemical Processing | 200S | 2ZZP00001 | Chromic Acid Anodize | N/A |
Chemical Processing | 200A | MIL-A-8625/MIL-PRF-8625, Type 1 and Type 1B | Chromic Acid Anodize | F-35 Type IB only F-16 Type I only |
Chemical Processing | 210 | AMS-C-5541/MIL-DTL-5541, Type I, Class 1A and Class 3 | Chem Film | N/A |
Chemical Processing | N/A | AMS2700 | Passivation | N/A |
Chemical Processing | N/A | AMS-QQ-P-35 | Passivation | N/A |
Chemical Processing | N/A | FED-QQ-P-35 | Passivation | N/A |
Chemical Processing | N/A | ASTM A380 | Passivation | N/A |
Chemical Processing | N/A | ASTM A967 | Passivation | N/A |
Heat Treat Verification | 164 | 5PTPCG09 Appendix A | Hardness Testing | N/A |
Heat Treat Verification | 165 | 5PTPCG09 Appendix B | Conductivity Testing | N/A |
Heat Treat Verification | 167 | LMA-PC009 | Conductivity Testing | N/A |
Heat Treat Verification | 168 | LMA-PC009 | Hardness Testing | N/A |
Heat Treat Verification | 160 | NDTS-1500 / 1501 | Hardness Testing | N/A |
Heat Treat Verification | 161 | NDTS-1500 / 1502 | Conductivity Testing | N/A |
Heat Treatments | 612 | AMS 2750 | Pyrometry | N/A |
Heat Treatments | 606 | AMS-2770 | Aluminum | N/A |
Misc. | 926 | 5PTPTT02 | Fracture/Durability Critical Parts | N/A |
Misc. | 927 | 5PTPTT11 | Mission/Safety & Selected Durability Mech. Equip | N/A |
Misc. | 928 | 5PTPTT12 | Wind Swept Surface Parts | N/A |
Prime & Topcoat | 240C | LMA-PJ264 | Application and Control of Organic Finishes | N/A |
Process | Specification | Description | Comment |
---|---|---|---|
Chemical Processing | FP-28 | Chemical Film | N/A |
Chemical Processing | FP-79 | Passivate | N/A |
Heat Treat Verification | AMS 2658 | Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts | N/A |
Heat Treatments | AMS 2750 | Pyrometry | N/A |
Heat Treatments | AMS 2772 | Heat Treatment of Aluminum Alloy Raw Materials | N/A |
Heat Treatments | AMS-2770 | Heat Treat of Aluminum Alloys | N/A |
Heat Treatments | HT-1 | Heat Treatment of Aluminum Alloys | N/A |
Prime & Topcoat | FP-153 | Application of Primer | N/A |
Prime & Topcoat | FP-162 | Application of Topcoat | N/A |